To Fit Dividers
Step 1 - Place one foot of wire support divider through slot in the desired location on the flat metal base.
Step 2 - Squeeze the wire support divider and place the other foot of the divider through the opposite slot on the metal base
Step 3 - Up-turn the metal base and fit each foot of the support divider into the holes along the inside edges to lock divider in place.
Step 4 - Add rubber feet for extra grip. Determine where to place the next divider and repeat Step 1, 2 and 3.
To Relocate or Remove Dividers
Step 1 - Push both legs of the wire support divider toward the centre of the metal base to dislodge each foot from the lock hole. Step 2 - Remove one leg at a time.